Brushless rotor automatic assembly automatic line HG-WZ1A

Automatic line structure:

chip feeding machine → chip plastic basket feeding whole basket, CCD automatically distinguish the surface

Rotor mandle-pressing machine → closed loop pressing assembly, with chip thickness detection, servo pressing assembly, pressing force detection, pressing size detection

Rotor blade and apron machine → closed loop pressing, equipped with servo pressing, pressing force detection, pressing size detection

rotor into the magnetite pressing shaft sleeve machine → four positions at the same time into the four magnets

Rotor balance detection machine → Adopt intelligent balance detection instrument

Rotor automatic magnetizing machine → chip independent detection of magnetic flux

Rotor presser bearing machine → closed loop presser, equipped with servo presser, presser force test, presser size test

Rotor post-press bearing machine → closed loop press fitting, with servo press fitting, press force detection, press size detection

the rotor laser marking machine → laser marking, cut off the delivery of material

Features of the automatic line:

The design concept of flexible modularization, flexible and changeable use of equipment.

The process equipment can be modularized. The production line equipment can be splicing according to the process requirements like building blocks, or the process equipment can be used as a single machine;

There is no spare position.

The equipment contains three positions: feeding position, working position and feeding position. The working position is connected by manipulator, which reduces the number of products transferred between processes, greatly reduces the scrap of large quantities of products caused by equipment failure, and saves the production cost.

High degree of automation, reducing labor costs.

A line of at most 2 people (1 person feeding, 1 person receiving);

Rapid and convenient transformation.

Only need to replace the corresponding fixture and fixture and the corresponding automatic device for automatic material loading during the transformation;